Baseline energy, total saving, saving rate, annual cost impact and the main engineering conclusion.
Industrial energy audit report example
What a useful industrial energy audit report should include
A credible industrial energy report should do more than list potential savings. It should show the baseline, explain where each saving comes from, separate system-level effects and make the next engineering action clear.
- Use this page as a report checklist before preparing an industrial energy diagnosis.
- Review how a sample report separates compressed air, chiller plant, HVAC, heat pump, steam, electrical and multi-energy opportunities.
- Start with a free result, then unlock the downloadable engineering report only when the finding is useful.
Report checklist
The six sections customers expect to see
A report becomes actionable when the structure lets a plant manager, energy consultant or supplier understand the current condition, the saving source and the next data to confirm.
Electricity, fuel, steam, cooling or compressed air baseline, with a clear measurement boundary and price basis.
Separate savings by compressed air, chiller plant, HVAC, heat pump, steam, electrical system and multi-energy boundary.
Equipment selection, control, distribution, end-use and recovery measures with the owner of each saving stated clearly.
Inputs, formulas, assumptions, default values and overlap treatment behind the reported saving.
Recommended sequence, measurement notes, supplier discussion points and risks before committing capital.
Example finding structure
Each finding should answer four engineering questions.
A weak report says only that a site can save energy. A useful report explains the current issue, the calculation basis, the recommended action and the measurement boundary. That structure is what makes the report usable in a project discussion.
Report item
What the report should show
Why it matters
Compressed air pressure and unload loss
Current pressure, required end-use pressure, control band, unload or blow-off evidence and estimated saving.
Pressure, leakage and control can overlap, so the owner of the saving must be clear.
Chiller plant temperature and sequencing
Plant COP, chilled-water temperature, condenser-water condition, running chiller count and low-load operation.
Chiller-side, pump-side and terminal-side savings should not be counted twice.
Steam or boiler recovery
Boiler efficiency, stack loss, blowdown, condensate return, steam trap and low-grade heat replacement opportunities.
Fuel saving and cross-system heat recovery need separate boundaries.
Multi-energy recovery
Recoverable waste heat, alternative energy price, useful heat demand and incremental benefit after single-system savings.
Integrated-energy savings are valuable only when incremental benefit is separated from the original system saving.
Sample report depth
What the kWhScan sample report shows before payment
The public sample is designed to show enough detail for a buyer to understand report quality before entering their own plant data or unlocking a downloadable report.
Baseline electricity, annual saving, saving rate, annual cost impact and system count.
System-by-system contribution from steam, multi-energy recovery, chiller plant and compressed air.
Ranked actions such as low-grade steam replacement, boiler efficiency, capacity matching and heat recovery.
Executive summary, calculation trace and implementation priority are shown as a paid-report preview.
Inputs, assumptions, overlap rules and measurement notes are kept visible instead of hidden behind one total number.
Users can open a pre-filled demo case, replace sample values and run their own diagnosis.
Use the example
Choose the report path that matches your project.
If you need a broad view, start from the integrated-energy sample. If your current project is focused on one utility system, start from the matching system page and run the free diagnosis from there.
Compressed air audit report example
See how pressure, equipment selection, unload loss, leakage, dryer purge and heat recovery should be written in a system-specific report.
Chiller plant energy diagnosisReview how chiller efficiency, chilled-water reset, condenser-side optimization, low delta-T and heat recovery are separated.
FAQ
Industrial energy audit report questions
What should an industrial energy audit report include?
It should include the current energy baseline, cost basis, system contribution, saving measures, calculation trace, assumptions, overlap policy, implementation priority and measurement notes.
Should the report show every calculation?
It should show enough calculation trace for a reviewer to understand the input values, formulas, assumptions and boundaries. The report does not need to expose irrelevant internal logic.
Can I start without time-series data?
Yes. The first diagnosis can use bills, meters, nameplates, controller readings and operator observations. Time-series data improves control and load-profile diagnosis when available.
Is this page a downloadable report template?
No. It is a report example and checklist. The downloadable report is generated from the diagnosis workbench after a project result is created and unlocked.
Review the sample report, then run your own diagnosis.
Use the example to judge the report structure before entering site data or paying for a downloadable report.